VETO PRO PAC - Tech LC

VETOTECHLC

This VETO VETOTECHLC, VETO PRO PAC - Tech LC accommodates HVAC service technicians' tools and work routines. The Tech LC sports 53 pockets with ample room for hand tools, parts, meters, drills, and other bulkier items. 8 small neoprene pockets have beena dded for drill bits and bit extensions.

Dimensions + Weight:

• Width: 240 mm

• Length: 350 mm

• Height: 480 mm (310 mm with Handle Folded Down)

• Weight: 2.5 kg when empty

Maximised Tool Storage Capacity: 

• Vertical Tool Pockets: 50 inside & 3 outside

• Flat Zippered Pockets: 4 inside & 2 outside

• Neoprene Pockets: 2

• D-Rings: 4 large and 5 small

• Exterior Electrical Tape Loop: 8” Fabric with Clip Closure

• Stainless Steel Tape Clip: Yes

Rugged Materials & Construction: 

• Waterproof Base: 3 mm Injection Molded Polypropylene

• Waterproof Body Fabric: 1800 PVC Impregnated Denier Nylon

• Waterproof Tool Pocket Fabric: 1800 PVC Impregnated Denier Nylon

• Handle: Injection Molded Nylon Plastic with over-molded rubber grip

• Zippers: Double Stitched, Heavy Duty Plastic Coil Zippers with Oversized Zipper Tabs

• Fold-Back Snaps: 6 zinc, marine grade

• D-Rings: Powder Coated Steel

• Rivets: 38 zinc, marine grade rivets

• Stitching: Industrial Strength Double Nylon Stitching

Product Care:

• Keep the zippers clean and lubricated: 
  Over time, dirt and grit will “clog” the zipper coils preventing them from staying closed. To keep this from happening, clean and lubricate your zippers twice a year (more often if you work on a job site with a high amount of airborne debris). To clean the coils: Scrub them with soapy water; a tooth brush works very well. After scrubbing the coils, blow them out with an air hose to dislodge any other fine grit that didn’t dislodge with the brush. To lubricate the coils: Apply a silicone spray, beeswax or a zipper lubricant.
  
  
• Protect the zippers from sharp objects and/or excessive heat: 
  Any sharp object or heat source is capable of permanently damaging the zippers. Once a zipper coil is cut or singed the zipper will not function and in most cases is not repairable. Most of the cut zipper coils we see are the result of sharp tools stored inside the bag with the sharp side facing up. Make sure to keep the sharp edges of your tools facing down in your bag and away from the zipper coils.
  
  
• Don't overstuff the bag: 
  Overstuffing your tool bag will very likely cause significant stress on the zippers that is above and beyond what the bag was built for and will eventually cause the zipper(s) to separate. If you have to work hard to close your zipper(s), your tool bag is most likely overstuffed