FIELDPIECE
FIELDPIECE POWER True RMS Clamp Meter—with kW power range for electricians & HVACR service
Pickup available at 36 Enterprise Drive
Usually ready in 24 hours
FIELDPIECE POWER True RMS Clamp Meter—with kW power range for electricians & HVACR service
SC480INT
As Top-of-the-Line of HVACR meters, not only does the SC480INT communicate with Job Link, but you can also measure the kW power consumption to determine system efficiency with it.
Details:
-
Verify 3-phase rotation with just two leads
-
Take more accurate VAC and AAC readings with True RMS
-
Filter out noise to get true voltage and frequency with low pass filter
-
Measures kW power for system efficiency
-
Has True RMS and Low Pass Filter (LPF) to obtain accurate VFD readings
-
Measures start/run capacitors
-
Molex tips reach into power connectors
- Magnet for mounting meter during use
-
Safety-rated CAT IV-600 V/CAT III-1000 V
-
Job Link® System Mobile Capability
-
Send and save electrical measurements to Job Link® System mobile App Plus, calculate kW power and system efficiency for in depth understanding of system performance in real world conditions
-
Electrical Testing for HVACR: True RMS readings through the clamp or leads. Inrush current mode to capture starting Amps
-
Test 3-Phase Power Test: Conveniently test phase rotation without carrying an extra meter or lead
-
Rugged Dual Display: Broad temperature range tolerance allows for testing in freezers and on rooftops
Specifications:
-
Display: 10000 count dual display
-
Backlight: 5 minute duration with auto-off, blue colour
-
Overrange: “OL” or “-OL” is displayed
- Measurement rate: 3.3 times per second, nominal
-
Zero: Automatic
-
Operating environment: 0 to 50 °C at <70% RH
-
Storage temperature: -20 to 60 °C, 0 to 80% RH (with battery removed)
-
Accuracy: Stated accuracy @ 23 °C ±5 °C, <75% RH
-
Temperature coefficient: 0.1 x (specified accuracy) per °C [0 to 19 °C, 28 to 50 °C]
-
APO (Auto Power Off): approx 30 minutes
-
Power: Single standard 9-Volt battery, NEDA 1604, JIS 006P, IEC 6F22
-
Battery life: 100 hours typical alkaline (No wireless, no backlight)
-
Low battery indication: Battery icon blinks and "batt" is displayed when the battery voltage drops below the operating level
- Dimensions (mm): 247 x 79 x 48
-
Weight: approx 345 g including battery
-
Altitude: Up to 2000 m
-
Overload protection: 1000 VDC or 750 VAC rms unless otherwise stated
-
Test leads: Use UL listed test leads that comply to UL61010-031 rated CATIII 600 V or above. Included test leads are gold-plated and have removable safety caps
What's included:
-
SC480INT Bluetooth Clamp Meter
-
ADLS2 Deluxe Silicone Lead Set with Gold Plated Tips and Removable Sheath
-
ATB1 Wrap Tab Type K Thermocouple
- ASA2 Short Alligator Lead Extensions
-
9 V Battery
-
ANC7 Padded Case
-
Operator's Manual
-
Velcro Strap